CARB Executive Order · Air Intake
EO D-269-95
K&N Engineering · Fuel Injection Performance Kit (FIPK2)
- Executed
- June 2021
- Rows shown
- 3
- PDF pages
- 3
Vehicles and part numbers in Exhibit A
Rows below are copied from the EO's vehicle table (Exhibit A). Listed in CARB EO D-269-95; final determination by CARB / Smog Check station.
2013–2016 Ford Escape · 2.0L Turbocharged
69-3537TS
2015–2016 Lincoln MKC · 2.0L Turbocharged
69-3537TS
2015–2019 Lincoln MKC · 2.3L Turbocharged
69-3537TS
Compare other brands for these vehicles
What the EO says about the part
The Fuel Injection Performance Kit (FIPK2) consists of the following main components: open-element reusable air filter, intake tube, assorted brackets, and hardware. OEM crankcase ventilation hoses cannot be replaced. Installation of the air intake system requires the removal of the stock air filter housing. If the stock air filter housing contains the vehicle's tune-up & emissions control label, a replacement decal must be placed in a similar location.
Quoted from EO D-269-95. The EO exempts the part from California Vehicle Code Section 27156 only for the vehicles it lists.
More EOs from K&N Engineering
All 111 K&N Engineering EOs we read All vehicles with an EO-listed air intakeSource: CARB Executive Order D-269-95 (PDF), retrieved November 11, 2026. EOs can be amended, superseded or revoked; CARB's copy is the authority. Independent reference, not affiliated with CARB.